Archive for the ‘Press Releases’ Category

EDD quality CRCA Steel Strips in thinner guages

Tuesday, March 13th, 2007

We have been supplying these special purpose steel strips to a number of Industries.

Safety Pins,Picture Tubes,Battery Caps,Buttons,etc. are some of the Industries wherein we have established our reputation as a prominent supplier of EDD Quality Mild Steel Strip.

We have accomplished the strictest parameters of OEM’s as regards chemical and mechanical properties. With a maximum hardness of 75HV we have achieved a cupping value of 14mm.

We feel ourself in a comfortable position in any size in this particular Grade.

For more information, we invite to visit our website: www.btstrips.com

widest variety of products under one roof.

Tuesday, February 27th, 2007

We offer the widest variety of Grades under one umbrella.

Spring Steel Strip: Hardened tempered and annealed in Grades C62,C75,C80,C98,50CrV4,HC21,55Si7,Ni-Cr100C & 75Cr1.

Mild Steel Strip: D,DD,EDD,ST42,ST55,etc.

Low alloyed Steels: 50CrV4,16MnCr5,20MnCr5,etc.

Micro-alloyed steel strip

Hot Rolled Sheets/Plates: 45C8,55C8,C80,Mild Steel,TISCRAL,Corten Steel,Sailma Hard,etc.

BTC- a complete solution to steel strips. 

price increase in steel

Tuesday, February 27th, 2007

The prices of steel strips is going to see a upward trend in the month of March.

The steel plants are increasing there prices for Hot Roled Coils by 1100/- per M.T. approximately.

Thus the market which was going through a slump since last 11 months will see a price increase after a while.

In CRCA Steel Strips and Hardened Tempered Steel Strips(Spring Steel Strip) are expected to increase by 2000/- per M.T.

Excise duty in steel strip

Wednesday, February 21st, 2007

There are strong rumours that the slab of excise duty in steel is going to be reduced to 12%

As a result the price structure of steel will remain uneffected even if there  is a price increase in the steel sector which is expected to be due in the month of March.

The price increase in Spring Steel Strip( CRCA Steel Strip and Hardened Tempered Steel Strip) is inevitable, but the excise part will balance the effect of the price increase.

TATA STEEL BECOMES THE FIFTH LARGEST PRODUCER OF STEEL

Thursday, February 1st, 2007

TATA’s acquires CORUS.

This is the talk of the day.  This is not only a win for TATA STEEL but also an issue of national pride.The Indian Companies are going global and by acquiring CORUS Tata Steel have become the fifth largest producer of steel in the world.

The price of acquiring Corus stands at Rs.97500 crore. But Corus will  serve as the gateway for Tata’s to get into the European Market with a bang.

This will bring a revolution in the market of Steel Strips-both CRCA and Hardened-Tempered.

price trend in the month of February and March.

Tuesday, January 16th, 2007

Apart from the galvanized steel strips, the price of the normal carbon steel strip,i.e. mild steel steel strip,medium and high carbon steel strip will remain constant in the upcoming months.

The prices of CRCA Steel Strip has remain steady in the last 7 months.Since the overseas market is weak, the demand remains sluggish, and the prices in the International Market is going to remain stagnant in the coming months.

 

Hardened tempered steel strip and CRCA steel strip

Thursday, January 11th, 2007

 Hardened Tempered Steel strips are available in varying range of hardness, right from 28-30 HRC Rockwell on the lower side to 58-60HRC Rockwell on the higher side. These tailor made strips are manufactured out of specific requirements of customers. The basic raw material usually used is C-80 for hardness upto 52 HRC and C-98 for high hardness, i.e. above 53 HRC. This flexibility helps the end user un-necessary trouble of piece mill wise hardening. For example, in case of MRTC Knives, the end user has to take a piece of steel 1.00mm thick, then it has to be hardened and ground to .80mm. Thus it covers cost of unnecessary hardening, grinding of .20mm, increased labour cost, power and weight loss. Whereas, when the consumer can get material in Strip Form in .80 mm thickness, in 58-60 HRC hardness, then he can manufacture the material much cheaper, saving the extra cost of hardening,grinding,etc. We are a specialist in providing these types of hardened tempered strips, which are manufactured keeping in mind the exact requirement of the customer so that he can make end products in a more easier process saving a lot in production cost.

In CRCA Steel Strips also we offer the entire range in a wide variety of Grades.

For the entire details, kindly log on to: www.btstrips.com

BTC-comprehensive store for steel strip

Saturday, December 30th, 2006

right from 4mm width to 520mm wide in Cold Rolled Steel Strip (CRCA Steel Strips)as well as Hardened Tempered Steel Strip are offered by us at the most competetive pricing.

The range is exhaustive. Thickness ranging from .025mm to 5mm and width from 4mm to 520mm in Carbon Steel, covers most of the requirement in this segment.

We have also developed strips for conveyor belts which is having a special hardness and tensile strength, to particularly suit the purpose of conveyors.

For more information, we invite to visit our website: www.btstrips.com

complete range of wood working saws, industrial knives and cutters

Thursday, December 28th, 2006

Our specialization in spring steel strip ( Hardened Tempered Steel strip and CRCA Steel strip) is a known fact.

We are also fully eqipped to supply all kinds of wood working saws and cutters, all kinds of industrial knives and cutting tools.

For more information in this respect, we invite to visit our website: http://www.btstrips.com/saws-knives.htm

Hardened tempered steel strip and CRCA steel strip

Monday, December 25th, 2006

The complete range of these strips in various Grades such as C30,C55,C62,C80,C98,HC21,50CrV4,16MnCr5,Fe410 and mild steel strips are in our supply range.

We are at ease in the above mentioned Grades right from a thickness range of  .05mm to 10mm thick.

We are the most comprehensive steel strip store for Hardened Tempered Steel Strip and CRCA Steel Strip.

For more information, kindly visit us at: www.btstrips.com