Spring Steel Strips as per JIS/BIS/ASTM/EN standards
Hardened Tempered Steel Strips
CRCA High Carbon Steel Strips
Low Alloyed Steel Strips
CRCA Steel Strips
Medium Carbon Strips
Low Carbon Strips
Rolling Hard Steel Strips
Razor Blade Steel Strips

Hardened Tempered Steel Strips

These strips are stocked and supplied in various grades, in different widths and thicknesses. We offer the following grades in hardened tempered steel strips.

Chemistry :

Chemical Composition
Grade	%C	%Si	%Mn	%S	%P	%Cr	%V	%Ni
C-65	0.60 -0.70	0.10.-0.35	0.50-0.65	0.05	0.05	-	-	-
C-80	0.75-0.85	0.10.-0.35	0.50-0.80	0.05	0.05	-	-	-
C-98	0.90-1.05	0.10.-0.35	0.50-0.80	0.05	0.05	-	-	-
50Cr4V2	0.45-0.55	0.10.-0.35	0.60-0.90	0.05	0.05	0.90-1.2	0.15-0.30	-
75Ni8	0.75-0.85	0.10.-0.35	0.50-0.80	0.05	0.05	-	-	1.72-2.10

Physical properties
Grade	Vickers Hardness (HV)	Yield Stress N/mm² (Min)	Tensile Strength N/mm²	Elongation %
C-65	350-425	1030	1180-1420	6
C-80	350-475	1080	1180-1570	6
C-98	475-540	1470	1570-1760	6
50Cr₄V₂	555-670	1760	1880-2360	4

We offer the following range in Hardened-Tempered Steel Strips.

Range
Width:	6 mm to 550 mm.
Thickness:	0.05 mm to 4 mm.
Hardness:	30 HRC Min to 58 HRC Max.
Surface Finish:	Bright polished, Blue, Brown & Grey.
Edges:	One or both side edge round, square & chamferd & sheared edge.

Form of supply: Materials are supplied in coil form. If any special I.D. & O.D. requirements are there, that can be maintained. Further, material can also be supplied in cut lengths, if required by the customer.

Applications: Flat springs for automobile clutches, masonary and agricultral tools, gang saw blades for marble cutting, doctor blades, band knives, drop pins for textile industries, wood working saws, carpentary tools, coil springs, flapper values, etc.

Masonary Tools	Coil Spring	Hand Saws	Knives

We are one of the largest steel strips suppliers of India, satisfying steel demand for a wide variety of industries.

Hardened Tempered Steel Strips