Spring Steel Wires.

BTC has added Spring Steel Wires in their product range. The variety as comprehensive as .30mm to 10mm, we are in a position to cater the growing demand of industry, supplying quality product at the right price and right time.The following aspects are taken care off very minutely:

Close combination of high strength and ductility
Consistency of physical properties
Appropriate surface finish
Proper coil characteristic and uniform winding
Rigid quality control from Steel to Wire
Narrow size tolerances

We welcome the valuable enquiries which will be dealt with utmost care and attention.

Inspection Procedure

Inspection: Each & every batch of material is thoroughly tested from a NABL ACREDIATED LABORATORY. Both mechanical & chemical tests are thoroughly carried out before dispatch of any material to our clients. Our Inspection Team keeps a constant vigil on the following parameters:

Chemical Analysis: It is thoroughly checked that all the elements are within the required norms. The material is out right rejected if there is any deviation as regards the chemical composition.

Mechanical Properties: Hardness, tensile strength, elongation & yield are tested and compared with the clients’ requirement. The material is dispatched only if the results are satisfactory.

Dimensions: Thickness, width and length (in case of cut length material) are inspected minutely. It is keenly observed, that no dimensions cross the tolerance limit.