Hardened Tempered Steel Strip

Form of supply: Materials are supplied in coil form. If any special I.D. & O.D. requirements are there, that can be maintained. Further, material can also be supplied in cut lengths, if required by the customer. Edges and hardness can be customized as per requirement.

Applications: Flat springs for automobile clutches, masonary and agricultral tools, gang saw blades for marble cutting, doctor blades, band knives, drop pins for textile industries, wood working saws, carpentary tools, coil springs, flapper values, etc.

We boast to maintain the widest range possible. Width as low as 4mm to 600mm on the higher side covers most of the requirement.

BTC also specializes in Special Steels where inclusionary properties plays a very vital role. We are approved in medical industry due to minimum inclusionary properties.

Flat wires in Spring Steel.

BTC is now self sufficient in supplying Flat Wires in Grades C62, C80 and 50-Cr4V2.

The edges can be customized and we offer a wide variety of options to our clients with sq. edges, round edges, half round edges, 1ER, 1sq, etc.

The range is exhaustive from 2.5mm width to 10mm width and thickness from 1.00mm to 6.00mm.

We welcome the enquiries of our customers with regards to above.

CRCA High Carbon Steel Strip

High carbon steels contain from 0.7 to 1.00% C with manganese ranging from 0.5% to 0.9% This steels are commonly known as spring steel. These steels are generally operated at very high stresses and heat-treated to obtain the maximum elastic limits and fatigue resistance without becoming sufficiently brittle to cause sudden failure in service. Hardenability of spring steel is very important because only fully hardened springs have the maximum resistance to take a permanent set (sagging).

Our Range:
Thickness: 0.07 mm to 4.00 mm
Width: 8 mm to 500 mm (in thickness lower than 0.6 mm, 4 mm wide material can be supplied)
Hardness: Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 270 VPN.

We welcome the valuable enquiries from our existing or to be clients.