GRADE C125 STEEL STRIPS

Earlier, import was the only option for this material, which was a big hassle. But now, we at BTC are regularly keeping stock of this material in various sizes, and can offer the same off the shelf.

Range:
Thickness: 0.07 mm to 4.00 mm
Width: 8 mm to 500 mm (in thickness lower than 0.6 mm, 4 mm wide material can also be supplied)
Hardness: Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 285 VPN.

This is a very special grade of steel and is mainly used for making those components where very high tensile strength & yield stress is required. It can achieve hardness of up to 58 HRC Rockwell after Hardening & Tempering.

Application: Mainly used for making Surgical Blades i.e. Scalpels, Metal Cutting Bandsaws, Knitting Needles .etc.